Synthesis and Evaluation of Difluorophosphate Salt Electrolyte Additives for Lithium-Ion Batteries

Synthesis and Evaluation of Difluorophosphate Salt Electrolyte Additives for Lithium-Ion Batteries

Hall, D. S., Hynes, T., Aiken, C. P., & Dahn, J. R. (2020)
Journal of The Electrochemical Society, 167(10), 100538. https://doi.org/10.1149/1945-7111/ab9b96

 

Abstract


The electrolyte additive lithium difluorophosphate improves the lifetime of lithium-ion cells. This work presents the synthesis and evaluation of alternative difluorophosphate salt electrolyte additives. Ammonium difluorophosphate is readily prepared via a solid-state, benchtop reaction of ammonium fluoride and phosphorus pentoxide that requires only gentle heating to initiate. The best yield of sodium difluorophosphate (NaFO) in the present study was obtained by reacting difluorophosphoric acid and sodium carbonate in 1,2-diemethoxyethane over 3 Å molecular sieves. Tetramethylammonium difluorophosphate was prepared from NaFO via cation-exchange with tetramethylammonium chloride. NaFO is here reported to be a very good electrolyte additive, with similar performance in NMC532/graphite pouch cells as the lithium salt. The beneficial nature of both additives is attributable to the difluorophosphate anion. In contrast, ammonium and tetramethylammonium difluorophosphates are found to be poor electrolyte additives. For the former, this is suggested to be due to the formation of lithium nitride and hydrogen gas.

Share:

LinkedIn
Twitter
Email

Resource Category Tags

Resource Format

Related Resources

A High Precision Coulometry Study of the SEI Growth in Li/Graphite Cells

The charge and discharge endpoint capacities as well as the coulombic efficiency of Li/graphite coin cells have been examined using the high precision charger at Dalhousie University.

BEEP: A Python library for Battery Evaluation and Early Prediction

Battery evaluation and early prediction software package (BEEP) provides an open-source Python-based framework for the management and processing of high-throughput battery cycling data-streams.

Interpreting High Precision Coulometry Results on Li-ion Cells

The High Precision Charger at Dalhousie University can be used to accurately measure the Coulombic Efficiency (CE) and the charge and discharge capacity endpoint slippages per cycle (Δd and Δc, respectively) of Li-ion full cells and Li/electrode half cells.